The company designs, manufacture of multi-functional all the way to wireless smart receiver controller, a relay output switch signal, allows to control the device or motor switch or pass-off conversion, and a variety of special requirements of the control program. Mainly used in the field of electric doors, windows, lifting equipment, gateways, lifts, industrial control and security industries.

        The wireless receiver controller, high confidentiality, stable performance, the characteristics of low power consumption, and easy to use, without the traditional jumper or DIP switch coding, just the radio signals emitted by the remote control to the receiver controller receiving and storage, to supporting the use of. The controller is factory default only one remote control, learning good remote control lost during use, simply use the same type of remote control to re-learn to cancel the original remote control of and made use now rights. The output mode of three lock points move, interlocking.

Output: (Special note: switch ways of working need to first disconnect the power before working properly)
①, non-locking signal - 1, 2, short circuit to take the short (self-locking control mode: Hold down the connected load, release the load is disconnected)
②, self-locking signal - 2,3 with a short circuit to take the short (self-locking control mode: Click the connected load, click a button disconnect the load)
③ signal interlock - 1, 2, 3 vacant, not less then (interlock-type control mode: press the A button connected load, press the B button to disconnect the load)

Learning methods:
Press and hold the learn button for three seconds, the red light is flashing to enter the learning state, any key on the remote control transmit signal, the indicator flashes twice to the lamp of success in learning.

Tip: ★ The controller confidentiality, allowing only to learn the eight remote control, if the study 9 the first one automatically cleared.
    ★ The controller with the fixed code 2260/2264/2262/5211 or learning code 1527/2240 remote control, the oscillation resistance not limited to, but 4.7M best.

Remote control distance: 50 m open area (the practical application of remote control distance according to the different environments vary)

Load Type: various types of load (energy-saving lamps, fluorescent lamps LED lights motor and so on ...... load)

Load capacity:

①, control 12VDC load ≦ 40W

②, Control 220VAC load ≦ 400W